| Contact arrangement |
1 Form A |
| Max. switching current |
120 A (AC, DC) |
| Max. switching voltage |
800 V AC, 60 V DC |
| Operating function |
Single side stable |
| Terminal shape |
PC board terminal (wide blade) |
| Min. switching load (reference value) |
100 mA 5 V DC |
| Dielectric strength (initial) : Between contact and coil |
5,000 Vrms for 1 min (detection current: 10 mA) |
| Dielectric strength (initial) : Between open contacts |
2,000 Vrms for 1 min (detection current: 10 mA) |
| Shock resistance (Destructive) |
980 m/s<sup>2</sup> (half-sine shock pulse: 6 ms) |
| Shock resistance (Functional) |
98 m/s<sup>2</sup> (half-sine shock pulse: 11 ms, detection time: 10 μs) |
| Vibration resistance (Destructive) |
10 to 55 Hz (at double amplitude of 1.5 mm) |
| Vibration resistance (Functional) |
10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 μs) |
| Protective construction |
Flux-resistant |
| Contact gap |
Min. 3.6 mm (Initial) |
| Contact rating type |
120 A |
| Conditions |
Ambient temperature: -40 to +85℃<br>(When using at 55℃ or higher, the coil holding voltage should be 50% V to 60% V)<br>Humidity: 5 to 85% RH (Avoid icing and condensation) |
| Contact material |
AgNi type |
| Insulation distance |
Min. 10.5 mm (Clearance and Creepage) (Initial) |
| Standard packingCase (pieces) |
50 |
| Rated coil voltag |
24 V DC |
| Rated operating power |
2,500 mW |
| Max. allowable voltage |
110% V of rated coil voltage (at 55℃) |
| Resistive load |
[at 85℃, switching frequency ON : OFF = 1 s : 9 s]<br>Min. 10x10<sup>3</sup> ope. 55 A 800 V AC<br>Min. 10x10<sup>3</sup> ope. 90 A 490 V AC<br>Min. 10<sup>3</sup> ope. 120 A 490 V AC<br><br>[switching frequency ON : OFF = 1 s : 9 s]<br>Min. 10<sup>3</sup> ope. 120 A 60 V DC |
| Coil holding voltage |
40 to 100% V (at -40～55℃)<br>50 to 60% V (at 55～85℃) |
| Contact rating (resistive load) |
120 A 490 V AC, 120 A 60 V DC |
| Contact resistance (initial) |
Max. 10 mΩ (by voltage drop 5 V DC 20 A)<br>Max. 3 mΩ (by voltage drop 5 V DC 120 A, reference value) |
| Contact shape |
Single |
| Insulation resistance (initial) |
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) |
| Max. switching power (resistive load) |
58,800 VA (AC), 7,200 W (DC) |
| Mechanical life |
Min. 10<sup>6</sup> ope. (switching frequency: at 180 times/min) |
| Unit weight |
Approx. 115 g |
| [[Specifications]]Surge withstand voltage (initial) : Between contact and coil |
10,000 V |
| Model Number |
HE1aN-W-DC24V-Y7 |
| Part Number |
AHE62X2N |
| Standard packing<br>Carton (pieces) |
10 |
| [[Coil data]]Coil resistance [±10%] (at 20℃) |
230 Ω |
| [[Coil data]]Operate voltage (at20℃) |
Max. 75% V of rated coil voltage (Initial) |
| [[Coil data]]Rated operating current [±10%] (at 20℃) |
104 mA |
| [[Coil data]]Release voltage (at20℃) |
Min. 5% V of rated coil voltage (Initial) |
| [[Specifications]]Operate time (initial) (at 20℃) |
Max. 30 ms at rated coil voltage (without bounce) |
| [[Specifications]]Release time (initial) (at 20℃) |
Max. 10 ms at rated coil voltage (without bounce, without diode) |
